MTS Rohrverlegegerät til salg - Tyskland

RING FOR PRIS
RING FOR PRIS
GRUNDLÆGGENDE INFORMATIONER
ProduktgruppeAndet tilbehør
Mærke / modelMTS Rohrverlegegerät
Årgang2016
Ekstra valgmulighederNy
MaskinplaceringAlsfeld
Land
Mascus ID84495A53
PRISSÆTTELSE
Pris ekskl. momsRing for pris
DETALJER
Passer til følgende maskinerEmpfohlene Baggergröße 30 - 50 t zum Verlegen von Beton- und Stahlbetonrohren DN 1200 bis DN 2200 in einer Länge von 2,5 - 3 m Max. Rohrgewicht 15 t
SerienummerRVG.16.0010
Driftstryk250 bar
Nødvendigt hydraulisk flow170 l/min
Transportvægt3.840 kg
Transportmål (LxBxH)2760 x 2270 x 3420
mm
ProduktionslandTyskland
ForsendelsesbetingelserEXW
Øvrige oplysningerDischarge large pipes quickly and safely from the truck, store them in intermediate storage, pick them up and install them. Piping from DN1200 to 2200 using the hydraulic energy of the excavator
Without use of chain hangers and hoists
The operator can pick up and position the pipe with the help of the hydraulically controlled functions. The integrated pendulum bearing with load cells makes it possible to check whether the pipe is already on the pipe bed or whether the load is still being lifted by the carrier device. The trolley of the system allows the inclination of the pipe to be installed to be adjusted to the required gradient.
Different pipe lengths can also be aligned and laid horizontally in this way without any problems. According to the manufacturer, the hydraulically operated rollers of the large-diameter pipe-laying device also enable precise radial alignment and positioning of a casing pipe. The joining of the pipes, which is accurate to the millimetre, is carried out with the aid of a mobile support strut which clamps itself into the already laid pipe by means of a vertical hydraulic ram. The pipe strut is carried along in the pipeline and connected to the hydraulic cylinder of the pipe-laying system on the excavator via a belt. By tightening the belt, the pipe to be inserted is joined precisely. The laying device distributes the load evenly over several points of application and over rubberized heavy-duty wheels. This virtually eliminates stresses in the pipe.
In this way, the entire process of pipe installation and pipe fittings can be controlled from the cab, and only the attachment of the stash has to be done manually.
InspektionsrapportRVG-16-0010-BA-und-ETL-MTS-Rohrverlegegerat-RVG-mit-OQ-70-55-Mail.pdf
Rohrverlegegerat-RVG-003.pdf

thyssenkrupp Infrastructure GmbH

  • +49 ...VIS
    Henvis til Mascus når sælger kontaktes
Skriv til sælger

Sælgers Efter/For Navn

  • BODO BERENDT

    thyssenkrupp Infrastructure GmbH
    weltweit
    • +49 ...VIS
      Henvis til Mascus når sælger kontaktes
    • +49 ...VIS
      Henvis til Mascus når sælger kontaktes
    • Sprog: Engelsk, Tysk
    • Hollestrasse 7a, 45127 Essen, Tyskland

Firma

THYSSENKRUPP INFRASTRUCTURE GMBH
5
ANTAL ÅR AKTIV PÅ MASCUS

Relaterede mærker

MærkeAntal annoncer
Caterpillar34207
Volvo8961
Liebherr8785
Komatsu7088
JCB4321

Mascus kan du finde MTS Rohrverlegegerät andre komponenter. Prisen på denne MTS Rohrverlegegerät er - og den er produceret i 2016. Denne maskine er placeret i Alsfeld Tyskland. På Mascus.dk kan du finde MTS Rohrverlegegerät og andre andre komponenter modeller. Detaljer - Passer til følgende maskiner: Empfohlene Baggergröße 30 - 50 t zum Verlegen von Beton- und Stahlbetonrohren DN 1200 bis DN 2200 in einer Länge von 2,5 - 3 m Max. Rohrgewicht 15 t, Serienummer: RVG.16.0010, Driftstryk: 250 bar, Nødvendigt hydraulisk flow: 170 l/min, Transportvægt: 3.840 kg, Transportmål (LxBxH): 2760 x 2270 x 3420 mm, Produktionsland: Tyskland, Forsendelsesbetingelser: EXW