RB iconIP iconMPE iconRBAS iconRouse icon
Mascus LogoAlle kategorier
Indryk annonce

Toro STX26

Pris ekskl. moms

Compnay LOGO
Images5
Toro STX26 Stubfræsere
Toro STX26 Stubfræsere
Toro STX26 Stubfræsere
FavoriteFavorit
shareDel
Save searchGem søgning
Udskriv

INFO

Produktgruppe
Stubfræsere
Mærke / model
Toro STX26
Maskinplacering
Fontana, California
Land
USA
Mascus ID
FF99E594

PRISSÆTNING

Vælg valuta

DETALJER

Lager nr.
2021041
Produktionsland
USA
Øvrige oplysninger
Toro STX-26 Walk Behind Stump Grinder, Gas Engine, Intelli-Sweep System, Rubber Tracks, Hydraulic Driven Cutting Wheel, 19" Cutting Wheet with 12 Teeth, 12.5" Cutting Depth, Low 754 Hours, Excellent Condition! Track Design • Allows for zero turn capability • Provides a low center of gravity and large footprint • Increased stability on side hills • Eliminates tire ruts and flat tires • Operates in wet & soft ground conditions. Full Hydraulic Operation • Eliminate the labor of tightening or replacing expensive poly-chain® belts or clutches • No need to replace expensive cogged pulleys • No worry of customers engaging grinder head at full throttle • Eliminate shock loads to the engine by belts slipping or head stopping Traction Controls Easy-to-use control system offers smooth operation and fewer lever/nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions. 1) Left/right traction control (forward, reverse, turn) 2) Sweep, lift/lower and engagement of grinder head. Offset Cutting Head • Provides operator with excellent visibility to stump • Allows full rotation perpendicular to machine Custom Trailer Easy to load on any trailer, including Toro's custom TRX trailer with an easy-to-use, built-in securing system. No need for straps or tie-downs. Tailgate design is safer and makes it easier to load than tilt-bed trailers. Trailer features highway rated tires. Specifications •Cutting Depth: 12.5" below grade •Cutting Wheel: 19" diameter to tooth; 3/4" thick, 12 green teeth •Cutting Height: 35" above grade •Head Swing: 47" Arc •Hydraulic Flow: 13.5 gpm hydraulic flow to head •Engine: Kawasaki 730V Twin Cylinder •Dimensions: 34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) H •Weight: 1200 lbs. (545 kg) •34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) HVis mere

ReQuip Corporation

16516 Washington Dr 92335 Fontana California USA
Få notifikation på e-mail
Vis alle annoncer fra ReQuip Corporation
report adAnmeld som mistænksom annonce